# Geodesics and planar approximations using PROJ and geod¶

The PROJ system supports computations with Geodesic calculations, through API calls or through the geod command line interface. This exercise will proceed mostly by having you copy sample commands from the text onto the command line, and noting the results.

The tutorial is written with the Windows command line in mind but it should be straight forward to use it on Unix-based systems as well.

Hint

Users of Unix-based systems can replace `set`

with `export`

and `%VAR%`

with `$VAR`

to follow the tutorial.

## 1. Objective¶

The objective of this exercise is to investigate how well a straight line in a projected plane approximates the geodesic between the same end points.

## 2. The geodesic¶

The geodesic we will consider runs from Helsinki to Tallinn, using the following coordinates:

```
Helsinki 60.171 N 24.938 E
Tallinn 59.437 N 24.745 E
```

So to save some typing, let's define some environment variables. On Windows:

```
set HEL="60.171 24.938"
set TAL="59.437 24.745"
```

```
export HEL="60.171 24.938"
export TAL="59.437 24.745"
```

(i.e. mark, copy, and paste these lines into the command prompt)

First, we want to solve the "inverse geodetic problem" for the geodesic, i.e. finding the azimuth and distance between the two points:

```
echo %HEL% %TAL% | geod -I +ellps=GRS80
```

where the `-I`

option indicates "the inverse geodetic problem".

geod replies with these 3 numbers:

```
-172d22'12.772" 7d27'46.693" 82488.500
```

The first is the forward azimuth from Helsinki to Tallinn, the second is the return azimuth, while the third is the distance in meters.

We would actually rather have the azimuths in fractional degrees, so we provide
an explicit output format, using the `-f`

option to geod:

```
echo %HEL% %TAL% | geod -I -f "%.12f" +ellps=GRS80
```

getting us:

```
-172.370214337896 7.462970382137 82488.500
```

We assert that the planar approximation is worst at the midpoint of the
geodesic, i.e. `(82488.5 m) / 2 = 41244.25 m`

, from Helsinki. So now, we
want to find the coordinates of this point, by solving the "direct geodetic
problem":

```
echo %HEL% -172.370214337896 41244.25 | geod -f "%.12f" +ellps=GRS80
```

resulting in:

```
59.804045696236 24.840439590098 7.545306054713
```

i.e. the latitude, the longitude, and the return azimuth of the mid point of the geodesic.

Now, for convenience, define this environment variable:

```
set MID="59.804045696236 24.840439590098"
```

Note

You can save a bit of manual copying by capturing the geod output into
the clipboard, using the "clip" command on Windows, i.e. by appending `| clip`

to the `geod`

command above.

## 1. The planar approximation¶

We will be working on ETRS89/UTM35 coordinates, so first define an environment variable, to save some typing:

```
set utm35=proj -rs +proj=utm +zone=35 +ellps=GRS80
```

Note

The `-rs`

option switches the proj coordinate i/o order to latitude/longitude
and northing/easting, respectively. We do this to comply with the expected order
for the geod program.

Now, find the UTM coordinates of the two end points:

```
echo %HEL% | %utm35%
echo %TAL% | %utm35%
```

Note your results and compute the mean of the northings, and the mean of the eastings, to obtain the planar approximation of the mid point

Hint

you can use python as a makeshift command line calculator by saying:

```
python -c print((4+8)/2)
```

Now, compute the geographical coordinates corresponding to the UTM mid point:

```
echo <your northing your easting> | %utm35% -f "%.12f" -I
```

(note the -I option for doing the inverse projection)

For convenience define:

```
set MID_APPROX=<your result here>
```

Finally, compute the distance between the geodesic mid point and its planar approximation, by stating it as another case of the inverse geodetic problem:

```
echo %MID% %MID_APPROX% | geod -I +ellps=GRS80
```

resulting in:

```
107d0'16.673" -72d59'43.193" 2.527
```

i.e. a deviation of 2.5 m over a stretch of about 85 km.

## 4. Suggested meditations¶

Consider these aspects:

Given that geod is available, fast, and reliable - is it really worth the effort doing approximate calculations in the projected plane?

geod includes functionality for computing intermediate points along a geodesic. Check the manual, especially the description of the

`n_S`

option, and try to compute the geodesic mid point directly, by setting`n_S=2`

.One should actually expect the result of meditation 2 above to be slightly superior to the result obtained in the exercise. Why?

## Answers¶

```
Helsinki, UTM: 6672241.54 385592.95
Tallinn, UTM: 6590881.40 372106.37
Mid point, UTM: 6631561.47 378849.66
Mid point, GEO: 59.804039062602 24.840482644156
```

Meditations:

Probably not

`geod +lat_1=60.171 +lon_1=24.938 +lat_2=59.437 +lon_2=24.745 +n_S=2 +ellps=GRS80 -f "%.12f"`

Avoids a bit of truncation of the azimuth, and

*may*use a slightly superior algorithm (check the code!)