Coordinate conversions¶

In ISO19111 terms, a coordinate conversion is an operation that changes coordinates in a source coordinate reference system to coordinates in a target coordinate reference system in which both coordinate reference systems are based on the same datum. Technically this is also true for PROJ although the term is usually narrowed a bit, excluding projections since those are the origin of PROJ they get special treatment.

In this exercise we will be looking at three coordinate conversions that in combination with other operations are very powerful: Unit conversions, axis swapping and geodetic to cartesian conversion. Here we only look at the conversions by themselves which isn't particularly useful, apart from the educational purpose. When used in transformation pipelines they reveal their true power. We will explore that further in the pipelines.gie exercises.

See Conversions for a list of all conversions available in PROJ.

Download the gie file for the exercise: `conversions.gie`.

1. Unit conversion from meters to feet¶

Many projected coordinate systems are defined in terms of units other than the meter. In this exercise we will transform the horizontal part of a coordinate from meters to feet.

Hint

Consult Unit conversion to find out how to set up the transformation

Hint

You can use `proj -lu` to learn which units is supported by PROJ.

Hint

Note that the horizontal, vertical and temporal parts are treated separately by the unit convert operator.

```operation   <your answer here>
tolerance   1 mm

accept      100.0       123.0       432.0
expect      328.0833    403.5425    432.0
```

2. Swapping axes¶

Many coordinate reference systems are defined such that the axis order is different than the (east, north, up, time) PROJ defaults to. An example of this is the standard representation of a latitude/longitude-pair, where the north component of the coordinate comes first. For this reason we need an operation that can swap the axes around so that a given coordinate reference system can be represented correctly, conforming to the intention of the defining authority.

Set up an operation that puts a longitude/latitude pair on the standard latitude/longitude form.

Hint

Consult Axis swap to find out how to set up the transformation

Hint

Remember that the axisswap operation doesn't know anything about the nature of the coordinate that is passed to it - it only cares about the the order of the input.

```operation   <your answer here>
tolerance   1 mm

accept      140.0     75.0    # somewhere in Siberia
expect       75.0    140.0
```

3. Geodetic to cartesian conversion¶

Some transformations, most notably the Helmert transformation, operate on cartesian geocentric coordinates. Geodetic coordinates (latitude and longitude) is the most commonly used coordinate representation. It is only natural to have a way to convert between the two representations.

Set up a transformation that convert geodetic coordinates to cartesian geocentric coordinates on the Hayford ellipsoid.

Hint

Consult Geodetic to cartesian conversion to find out how to set up the transformation

Hint

Remember that proj -le returns a list of available ellipsoid models

Hint

Remember that the Hayford ellipsoid is known under a number of other names - most of them including the term "international".

```operation   <your answer here>
tolerance   1 mm

accept      24.745          59.437          0  # Talinn, Estonia
expect      2952883.7000    1360985.5908    5468966.6589
```